1
1
3
3
3
1
1
3
3
3
1
1
3
3
3
1
1
3
3
3
1
1
3
3
3
+
+
20
19.1
19.2
19.3
20.3
20.4
20.5
20.1
19.4
19.5
19
20.2
MOTION
CM-09/10 ELECTRONIC TUBULAR MOTOR
MOTION
CM-09/10 ELECTRONIC TUBULAR MOTOR
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
To activate
channel select
simultaneously
hold the
channel
selection
button
and press the
pair
button.
Press the pair
button on the (new)
remote to pair the
blinds to the new
channel.
To exit channel
select go back to the
channel selected at
step 19.1 and repeat
step 19.2
All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or other remote.
Select a new channel on
the (new) remote.
Channel select makes it possible to copy blinds in between channels/remotes without having
to physically press the program button on the motors.
Select the channel
you would like to
copy.
To activate
channel select
simultaneously hold
the
channel
selection
button and press the
pair
button.
Press program
button on the (new)
remote to pair the
blinds to the (new)
remote.
To exit channel
select choose
the channel you
selected at step 20.1
and repeat step 20.2
All blinds in the selected
channel will start
stepping, indicating
program mode has been
activated. All blinds
can be copied to a new
channel on the same
remote or to other
remotes. Select a channel
on a (new) remote.
Frequently Asked Questions
Channel select 5 channel remote
EnglishEnglish
Problem
Cause
Solution
Blind does not work.
Power supply is not connected.
Connect the power supply to the motor.
Remote battery is empty. (LEDS of remote
are flashing rapidly.)
Replace the battery in the remote.
See the manual of the remote.
Remote battery is inserted incorrectly.
Replace the battery in the remote.
See the manual of the remote.
Radio-frequency interference
Make sure that the antenna of the motor is
out of the way from metal objects.
The distance from the remote to
the motor is too far.
Move closer to the motor.
The remote is not connected to
the blind.
Pair the remote to the motor.
See step 3.
Multiple blinds respond to a
remote. (Unable to program a
single blind)
Multiple blinds are paired to a single
channel.
Pair the blind to a free channel to program
or use single select to program the blind.
Blind moves in small steps.
1) No end limits are programmed.
2) Direct control is de-activated.
1) Program end limits. See step 5 - 8.
2) Activate direct control. See step 14.
Favourite position can not
be programmed.
No end limits are programmed.
Program end limits. See step 8 - 11.
Blind lowers too far.
End limits are programmed incorrect.
Reprogram end limits. See step 8 - 8.
Blind moves in the opposite
direction
The direction of rotation has been
set incorrect.
Change the direction of rotation.
See step 4.
The blind keeps moving up and
down.
The blind is in program mode.
Press the program button on the motor
to exit program mode.
Channel select 15 channel remote
Select the channel
from which the
blinds must be
copied.
