Cotek S1500-112, Руководство пользователя

Страница: 11 / 38

3-3. Installation:
Where to install. The power inverter should be installed in a location that
meets the following requirements:
3-3-1. Dry – Do not allow water to drip or splash on the inverter.
3-3-2. Cool – Ambient air temperature should be between 0
℃
and 40
℃
, the
cooler the better.
3-3-3. Safe – Do not install in a battery compartment or other areas where
flammable fumes may exist, such as fuel storage areas or engine
compartments.
3-3-4. Ventilated – Allow at least one inch of clearance around the inverter
for air flow. Ensure the ventilation openings on the rear and bottom
of the unit are not obstructed.
3-3-5. Dust-free – Do not install the S1500 Inverter in a dusty environments
where are dust, wood particles or other filings/shavings .
These dust can be pulled into the unit when the cooling fan is
operating.
3-3-6. Close to batteries – Avoid excessive cable lengths but do not
install the S1500 Inverter in the same compartment as batteries.
Use the recommended wire lengths and sizes (see section 2-10 ).
Also do not mount the S1500 Inverter where it will be exposed to the
gases produced by the battery.
These gases are very corrosive and prolonged exposure will damage
the S1500 Inverter.
3-4. Quick hook – up and testing:
For a quick hook-up of the power inverter to check its performance
before going ahead with installation, please follow these guidelines:
3-4-1. Unpack and inspect the power inverter, check to see that the power
switch in the OFF position.
3-4-2. Connect the cables to the power input terminals on the rear panel of
power inverter .
The terminal is positive (+) and black terminal is negative (-).
Insert the cables into the terminals and tighten allen nut to clamp the
wires securely.
10