4
EN
GL
IS
H
2) Electrical Safety
a) The electrical hand tool’s plug must fit correctly into the wall socket. Never modify
the plug in any way. Never use an adaptor together with earthed electrical hand
tools. Unmodified plugs and suitable wall sockets decrease the risk of electric shock.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens
or refrigerators. There is an increased risk of electrical shock if your body is earthed.
c) Do not expose the electrical hand tool to rain or other wet conditions. If water gets
inside an electrical hand tool it increases the risk of electrical shock.
d) Do not abuse the lead. Never use the lead to carry the tool, drag or pull the
plug out of the wall socket. Keep the lead away from heat, oil, sharp edges and
movable parts. Damaged or tangled leads increase the risk of electrical shock.
e) When using an electrical hand tool outdoors use an extension lead that is suitable
for this purpose. Use of an extension lead for outdoor use decreases the risk of
electrical shock.
3) Personal safety
a) Pay attention to your actions and use common sense when using electrical hand
tools. Never use an electrical hand tool if you are tired or under the influence of
drugs, alcohol or medication. One moment of inattention while using an electrical
hand tool may result in serious injury.
b) Use protective equipment. Always wear safety glasses. Using protective clothing
such as a face mask, non-slip safety shoes, a helmet and ear defenders when
needed decreases the risk of injury.
c) Avoid accidental starts. Make sure that the power switch is set to
OFF
before you
connect the device to the wall socket. Never carry an electrical hand tool with
one finger on the trigger or never connect the hand tool to a wall socket when the
switch is set to
ON,
since it may result in injury.
d) Remove all tools/keys before switching on the hand tool. A forgotten tool left on
moving parts of the electrical hand tool may result in injury.
e) Do not overreach. Make sure you stand steady and have good balance at all
times. This will allow you to have more control in unexpected situations.
f) Wear suitable clothing. Do not wear loose fitting clothing or jewellery. Keep hair,
clothes and gloves away from moving parts. Loose fitting clothes, jewellery or long
hair could get caught in moving parts.
g) If the equipment for dust extraction or collection is available make sure that
it is connected and used properly. Using technical aids may decrease dust related
hazards.
Содержание MOE-LR02-120
Страница 2: ......
