19
EN
G
LI
SH
Toggle between external temperature/hygrometer sensors
• In normal mode, press [ C ]
repeatedly to switch between connected
thermometers/hygrometers. The relevant
channel number will be shown on
the display.
• For the rolling display of all sensors,
press [ C ] until
appears
on the display. The weather station will
now display values from each connected
sensor at 5-second intervals.
Max/Min
1. In normal mode, press [ MAX/MIN/ALARM ] once. “MAX” will be shown on
the display, together with the maximum values for precipitation, wind speed,
pressure, temperature and humidity.
2. Press [ MAX/MIN/ALARM ] again. “MIN” will be shown on the display, together with
the minimum values for pressure, temperature and humidity.
When displaying max/min values, press [ HISTORY/− ] to toggle between the display
modes for precipitation and air pressure.
Reset measurement values
Max/Min values
Note:
When resetting maximum/minimum values, the stored values for all sensors will also
be reset.
1. In normal mode, press [ MAX/MIN/ALARM ] repeatedly to select
MAX
or
MIN
.
2. Press and hold [ MODE/SET ] for 3 seconds (CLR flashes) in order to reset the max
or min values respectively.
To reset the max/min values automatically, see the
Settings/adjustments section (CLR)
.
Precipitation
1. In normal mode, press [ MODE/SET ] twice to select the display mode for precipitation.
2. Press [ C ] or [ HISTORY/− ] repeatedly to select the display mode.
3. Press and hold [ MODE/SET ] for 3 seconds to reset the selected value.
Memory
To clear the weather station’s memory, see the Software (
WeatherHome)
section.
Содержание 18-3676
Страница 2: ...2...
Страница 116: ...116 SUOMI 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Sis yksikk N ytt symbolien selitys...
Страница 173: ...173...
Страница 174: ...174...