Cotech 18-3150, Оригинальное руководство пользователя

Страница: 6 / 24

6
EN
GL
IS
H
Care and maintenance
Unplug the pump from the power supply and remove any debris from the water inlet.
Troubleshooting guide
Problem Possible cause Possible solution
The pump runs but
doesn’t pump - Air in pump, outlet is blocked
- Air trapped in suction pipe
- Pump is blocked
- When the pump starts the
water level falls to below the
minimum level
- Clean the hose, straighten any kinks, etc.
- Wait 60 seconds until the pump is purged of
air, switch it off and then start it again
- Unplug the pump from the power supply and
remove any debris from the water inlet.
- Place the pump lower in the water.
The pump won’t
start or stops
under load. - The thermal protection device
has tripped.
- No power supply
- Dirt lodged in the pump
- Unplug and clean the pump Remember that
the max liquid temperature is 35˚C
- Check fuses and RCD, etc.
- Unplug the pump from the power supply and
remove any debris from the water inlet.
The pump runs but
the volume pumped
falls suddenly - Pump is blocked - Unplug the pump from the power supply and
remove any debris from the water inlet.
Pump doesn’t stop
when water level
has sunk - The float is prevented from
falling
- Place the pump so that the float can move
freely
Disposal
Dispose of your waste responsibly, sort and recycle where possible. All machines, hoses and packing material
should be sorted and handled according to local environmental regulations.
Specifications
XKS-401P, XKS-401P-UK XKS-751PW, XKS-751PW-UK
Rated voltage 230 V AC, 50 Hz 230 V AC, 50 Hz
Power 400 W 750 W
Pump Capacity 9,000 l/h 13,500 l/h
Pressure Head 8 m 8 m
Submersible Depth 8 m 8 m
Max. Particle Size 5 mm 35 mm
Max. Water Temperature 35 °C 35 °C
Hose connection 25 mm & 32 mm 25 mm & 32 mm
Union Thread Male 1 ″ and male/fem 1¼ ″ Male 1 ″ and male/fem 1½ ″
Length of Power Lead 10 m (H05RN-F) 10 m (H05RN-F)
Size 16 × 31 cm 16 × 35 cm
Weight 4.3 kg 5.9 kg