04
05
Maintenance
The metal parts do not need any particular care .However ,in certain
regions( ie seaside areas),certain coatings could be prone to damage
,In this case ,it is advised to use a rust prevention treatment.
All parts that are under constant friction can be oiled regularly whith
a suitable lubricant.
The ground on which the game is placed should be controlled
regularly. All elements such as stones or other objects that could
cause injury in the case of a fall, should be removed.
It is advised to remove the apparatus during the winter period
，
when not in use .to avoid any deterioration due to bad weather
conditions.
Practical advice
-Certain safety checks should be carried out regularly on the swing
set. This chek should includes, if necessary ,removing any sharp
edges, replacing missing screw covers, tightening the nuts and bolts
etc, to avoid any danger through normal wear and tear or any
upturning of the swing set.
Fixing into the ground see overleaf
IMPORTANT!
For safety reasons .the game must be embedded into
the ground :
Place the game in the desired position ,mark a square 350* 350mm
around each (the feet must be in the centre of the square) and dig a
hole 350mm deep Fill those holes whith a minimum of 300mm of
concrete .Do not exceed the ground level .Fit the embedding piece
into the centre of the concrete so that fixtures for screwing the posts
into place rise out of the concrete when the concrete is dry ,screw
the posts to the embedding pieces.
IMPORTANT!
Wait until the concrete is set before using play centre
and check anchorages regularly
S34
x3
S4
x1
L6
x6
Z1
x6
S6
x3
G1
x8
G8
x3
K
x4
Z1
x3
S38
x3
D6
x8
C50
x2
S1
x1
S2
x1
Z6
x2
Z7
x2
O
x2
D8
x4
L8
x4
F1
x8
1
2
3
