1)Remove the carton.Take out
the chair.
2)Install the pillow and
backrest cover.
1) As illustrated, push the backrest
downwards and tilt chair on to its
wheels at a 45° angle.
2) Slowly push and move the chair to
the desired location.
3) Lower the chair slowly and
smoothly until it is fully flat on the
ground.
• Allow sufficient space around the
chair for reclining purposes.
• To avoid damage to the floor and to
reduce noise, please put a rug under
the chair.
• Make sure that there is no barrier
at the front and the back of the chair.
• Please do not put the chair on wet
or uneven floor.
• To avoid signal interference, please
place the chair 3.3 feet away from TV
and radio.
PREPARATION
FOR USE
2. Place the chair in an open area
Warning:
Do not put the power cord under the chair! Beware of damaging the
power cord while moving the chair!
Warning:
• Do not move the chair when occupied or in use.
• Moving the chair may cause damage to the floor. Floor protection
is recommended (e.g. rugs or carpet).
• Do not drop or suddenly let go of the chair when moving as it may
damage the chair.
• Two persons are recommended when moving the chair and extra
care is required.
3. Move the chair
08
09
