www.costway.com
CARE AND MAINTENANCE
Secure safe in a proper area to prevent from falling and causing damage or injury.
DO NOT disassemble the products. For all repairs, contact us.
Clean with a damp purchase. DO NOT use chemicals or cleaning agents to clean the safe.
MOUNTING INSTRUCTIONS
For optimal safety and security, the safe must be mounted to the wall or to the floor in an
isolated, dry and secure area.
NOTES: This safe must be mounted to the floor or the wall. Failure to do so will
compromise the safety and security of the safe, and it may tip over.
Place the safe in the desired location. Lift the bottom carpeting up to find the locations of the
two holes marked on the floor or wall.
Drill holes for expansion bolts (or clamping screws) in the right place. Drill the appropriate
diameter and depth of pilot holes depending on the type of hardware. (12mm diameter holes
and depth >54mm,(2.13 inch) for included bolts.)
Turn the expansion bolts counter-clockwise to separate.
Use the expansion bolts (or clamping screws) to secure the case to the wall. Make sure the
case is mounted in place as required and then tighten all screws.
Note:
If the incorrect security code is entered 3 times you will have an automatic lockout for 20
seconds before you can try your code again.
If the incorrect security code is entered 3 additional times there will be a 5-minute lockout before
the code can be tried again.
05
Содержание HW67542
Страница 7: ......
