Assembly Instructions
Please refer to the components and hardware drawings to assemble.
Step 1:
As shown in Figure 1, first install two 2-inch plastic castors (with brakes)
and spring washers on the corresponding screw holes at the front end of the
chassis.
Step 2:
As shown in Figure 2, install two 2-inch plastics castors(without brakes)
and spring washers on the corresponding screw holes at the rear of the chassis.
Hardware
：
B1. M8 Torx knob
B2. M6 Triangle knob B3. 10# Open-end wrench
B4. Hexagon socket
head screw (M6*65)
B5. φ6.2 Washer
B6. M6 Self-locking nut
B7. 4# Allen key
B8. φ10.2 Washer
B9. Steel cover
B10. Switch wrench
B11. Compression
Spring
B12. 2''plastic castor
(without brake)
B13. 2''plastic castor
(with brake)
B14. Spring washer
B15. 14# Open-end wrench
Figure 1
Figure 2
03
B14
B14
B14
B12
B12
B13
B13
B14
