1
2
3
4
5
6
7
8
9
The product structure diagram is as follows
Preparation before Assembly
Frame Parts
：
First of all, thank you very much for choosing our products. Please read
the instructions carefully before assembling. Please refer to the
certificate or packaging for the production date.
Product Introduction:
The frame tube of this bedside table trolley is made of
steel pipe, the tabletop board is made of wood, and the height can be adjusted by
the upper and lower holes. The tabletop board components can be folded. The
bottom frame comes with four 2-inch plastic wheels and two brakes. The product
is suitable for the elderly, pregnant women, people with disabilities and other
people with limited mobility.
After unpacking the packing box, first remove the packing bag. Please take care
to protect all the parts in the box. If assembling on the ground, put the paper or
carpet on the ground to prevent scratches. Pay attention to the distinction
between parts and components, and then remove the inner carton, take out the
parts and place them first. (The components and hardware are shown in the
figure below.
1. Tabletop assembly
2. Inner oval tube assembly
3. Oval sleeve
4. M8 Torx Knob
5. Outer oval tube assembly
6. Chassis Assembly
7. M6 Triangle knob
8. 2” plastic castor
（
without
brake
）
9. 2” plastic castor
（
with
brake
）
A1. Chassis Assembly A2. Outer Oval Tube Assembly
A3. Adjustable Inner Oval Tube Assembly A4. Tabletop Assembly
A1
A2
A3
A4
02
