Costway EP24511US, Руководство пользователя

Страница: 8 / 12

www.costway.com
08
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT BREAKER FUSE BOX
Ceiling fan<A>
Ceiling fan<A>
Installation of the hanging bracket (suspension part)
For wooden ceiling, use wood screw to drill
on the wooden beam or the "junction box" to
fix the hanging bracket (selection is made
according to actual requirements of the
customers).
1)use the ceiling fan (A) as a guide, mark the spots where the 4 Self Tapping Screws (B) will be drilled.
2)Remove the Ceiling fan (A) , drill 4 holes for 3mm diameter, install the ceiling fan onto wooden ceiling with
the 4 Self Tapping Screws (B) & washers (C).
Note: According to the ceiling of different materials, use different screws to fix the hanging bracket.
Don't fix the hanging bracket on the wood ceiling less than 12MM to prevent danger caused by loosening of screws.
After the hanging bracket is completed, ensure that it can withstand the tension test of more than 68KG for safety.
For concrete ceiling, use the percussion bit
with diameter 8mm to drill holes according to
the length of expansion screws. Then use the
attached expansion screws to fix the hanging
bracket onto the ceiling (selection is made
according to actual requirements of the
customers).
SWITCH OFF THE ELECTRICAL MAINS AT THE CIRCUIT
BREAKER FUSE BOX
1)use the ceiling fan (A) as a guide, mark the spots where the 3
Expansion bolts(B) will be drilled
2)Remove the Ceiling fan (A), drill 3 holes and insert 3 Expansion
Bolts (B) into the concrete ceiling, install the ceiling fan and secure
with Flat Washer (C), Spring Washers (D) and nuts (E) .
IMPORTANT: The nut must be tightened