and small ice mode
f
.
3) CLEAN: The clean button, after pressing the clean button, start the motor,
after that start the water pump to draw water, repeat this cycle, more than
4 minutes to stop.
4) ADD WATER: Water shortage alarm: When this red is on, it means there
is water shortage in the water tank. You need to add water and press the
POWER button to restart the machine.
5) ICE FULL ice alarm: When the ice reaches the maximum amount of ice
storage container, the “ICE FULL” light flashes and the machine stops. At
this time, the ice needs to be poured out. When the ice position is lower
than the full sensor position, the machine automatically Restart
Operating Instructions
:
1. Step 1
Open the lid and take out the basket and add water to the reservoir.
Note: There is a maximum scale MAX in the reservoir. The water should not
exceed the MAX position. If the water exceeds the maximum scale
MAX, you need to open the bottom drain plug, release the excess
water, and cover with a transparent cover.
2. Step 2
Plug in the power, and press the POWER button to start the machine.
6
large ice mode for ambient temperature above 77°F
or ambient temperature below 68°F
Содержание EP24228
