www.costway.com
1
2
Connect the Power Supply & Attach the Rear Bed Board │ 13
1. Plug the battery connector into the vehicle connector, push firmly.
2. Fit the tabs on the rear bed board into the slots located in the rear vehicle body, and
press down until it “clicks” into place.
1
3
4
2
5
8
6
9
7
Attach the Seat & Attach the Basket │ 14
1. Fit the seat back to the seat.
2. Insert two Ø4x12 flat head screws from the bottom side of the seat, through the
seat and into the seat back, and tighten.
3. Fit the seat assembly to the vehicle body.
4. Insert four Ø4x12 flat head screws on the seat back and tighten.
5. Insert two M5x16 machine screws through the seat and into the vehicle body, and
tighten with a screwdriver.
6-7. Fit the basket fence to the basket base, insert four Ø4x12 flat head screws and tighten.
8-9. Fit the cargo basket to the bonnet. Insert four Ø4x12 flat head screws and tighten.
16
17
