www.costway.com
www.costway.com
2
1
2
1
3
5
7
4
6
L1
L1
L2
L2
Attach the Roof(1) │ 17
1. Using a screwdriver to remove the M5x25 machine screws and Ø5 nuts from the left and right
roof beams.
2. Fit the both roof beams to the roof.
3. Insert three Ø4x12 flat head screws and tighten on each beam.
4-5. Fit the rear roof support to the roof beam, secure with M5x35 machines *2 and Ø5 nut *2
you removed in step one. Repeat for the other side. (L2 to L2, R2 to R2)
6-7. Fit the front roof support to the beam, secure with M5x35 machines *2 and Ø5 nut *2 you
removed in step one. Repeat for the other side. (L1 to L1, R1 to R1)
“R” marked
“R” marked
“L” marked
“L” marked
HINT: The roof, roof beams, roof front supports and roof
rear supports are marked “L” and “R”, also they are
HINT: The following steps only for the type with roof.
designed to assemble together in only one way. Please
follow the guides: L to L (L1 to L1, L2 to L2), R to R (R1 to R1, R2 to R2)
1
2
3
Attach the Roof(2) │ 18
1. Fit the roof assembly to the vehicle body.
2. Insert a Ø4x12 flat head screw through the roof front support and into the bonnet,
and tighten with a screwdriver. repeat for the other side.
HINT: The following steps only for the type with roof.
3. Insert two Ø4x12 flat head screws through
the rear roof support and into the vehicle
body. and tighten with a screwdriver. repeat
for the other side.
Type with roof completed.
20
21
