1. Unplug adapter from the wall outlet. Then remove all ornaments and decorations.
2. Disassemble the tree from the top to the bottom. Gently lift the center pole straight up to remove from the section below , and
fold all branches toward the pole. Continue until the lowest tree section is removed from the tree stand.
3. Close the protective caps on the poles to avoid damaging the internal parts.
(See Fig. D)
4. Carefully place all tree sections into the shipping box and tape (not included) it shut.
5. Store your tree in a cool, dry place away from sunlight. Exposure to excessive heat or
humidity may damage your tree.
STORAGE INSTRUCTIONS
TROUBLESHOOTING TIPS
3. Each tree section is numbered with a sticker. Please identify all sections before assembling.
4. Assemble the tree from the bottom to the top
(See Fig. B)
. Remove protection cap, and insert the center pole into the stand.
Then slot together the remaining poles securely until the tree top is installed. Be sure that all cords are free from branch hinges.
5. Plug the adapter into the wall outlet
(See Fig. B)
. Your entire tree should now be lit.
6. This is a Simple Shape™ tree and no shaping is required. Just slightly upsweep all tips
(See Fig. C)
and shift branches to fill in any
gaps for a fuller, uniform look. Your Christmas tree is now ready to be decorated.
Top view
Side view
Fig. C
Page: 2 of 5
If Tree Does Not Illuminate / Some Bulbs Do Not Light or Flicker
1. Check to make sure that all connectors are properly connected and the adapter is plugged firmly into the wall outlet.
2. Turn the poles gently to ensure pole-to-pole connection is secured.
3. Try stepping on the On/Off switch foot pedal.
Loose Hinge Pin
1. Place the branch into the slot of the bracket.
2. Insert a new hinge pin (included) through the hole and secure with
a retainer washer (included). (
See Fig. E
)
TROUBLESHOOTING TIPS
Fig. E
This tree includes hinge pins/washers.
If extra parts are needed, please contact our customer service center.
SPARE PARTS
SPARE PARTS
Simply press the selector button to select from the following light functions:
1. CLEAR STEADY 2. CLEAR FADING 3. MULTI-COLOR STEADY
4. MULTI-COLOR FADING 5. CLEAR/MULTI-COLOR FADING
DUAL COLOR LIGHT CONTROLLER INSTRUCTIONS
Selector
Button
Remote Control
Light
Controller
Insulation Tab
REMOTE CONTROL INSTRUCTIONS
1. Remove the insulation tab of the remote control.
2. Press either selector button and wait for a second to enjoy light effects in the following sequence
(see
DUAL COLOR LIGHT CONTROLLER & REMOTE CONTROL
).
There are 13 brightness levels. Simply press the controller buttons
to increase or decrease the brightness to your liking.
Fig. D