9
Step 5-
Stick the conversion label on the rating plate as shown in Figure 9.
Metal Rating Plate
1.
2.
3.
4.
5.
6.
7.
Figure 1
7
Conversion Label
Figure 9
BATTERIES
Make sure the control knob is in the "OFF" position. Unscrew the push
button cap on the ignition module located on the control panel to access
the battery compartment. The ignition module requires one Alkaline AAA
size battery (1.5V). The negative (-) end goes in first. See Figure 10.
Dispose of battery safely. May explode or leak if charged or disposed of in
fire. Make sure of the polarity. Mercury and cadmium free.
MAINTENANCE
The flames should look like those in Figure 11. To clean the burner, use a soft brush after the burner
has cooled completely. Never use a vacuum cleaner on the burner. It is recommended to store the fire
pit indoors during winter if it will be subjected to freezing temperatures. The LP cylinder must be
disconnected and removed from the appliance before the appliance can be stored indoors.
Figure 11
Figure 10
Serial Number _________________
Model Number: 98900UK
CAUTION:
The gas pressure regulator provided with this appliance must be used. This regulator is set for an outlet pressure of
Minimum clearance from combustible constructions: Sides: 24 in.609 mm. Top 72 in. 1828 mm.
FOR OUTDOOR USE ONLY.
If stored indoors, detach and leave cylinder outdoors.
This appliance has been converted to use Natural Gas G20. 2H @ 20 mBar
Nom. Heat Input (gross) 13.5 kW High, 5.8 kW Low
Conversion Label
