13
Part 1 - Introduction
LED Status Indications
Mode
Status
Color
Description
LA
(Link/Activity)
On
Amber
Normal network connection at 10/100/1000Mbps
Blinking
Amber
Data transmission over the network in progress at
10/100/1000Mbps
Off
-
No network connection or a problem with the connection
SPD (Speed)
On
Green
Normal network connection at 1000Mbps
Off
-
No network connection or a problem with the connection
9
Reset Switch
The reset switch, which is located to the left of the Power LED button, is used to reset the
product's settings. Pressing the reset switch immediately reboots the product.
If the product does not reboot after pressing the switch, press and hold the switch for 5
seconds. You will need a straightened paper clip to press the reset switch.
0
PoE Max. LED
PoE Max. LED indicates PoE statuses.
LED Status Indications
Mode
Status
Color
Description
PoE Max.
On
Red
Power to the connected PoE-supported network camera
has reached maximum level allowed
Blinking
Red
The room of PoE power that could be supplied to the RJ-45
service ports is not enough to ensure IEEE 802.3af 1 port
(15.4W)
Off
-
Normal to supply power to the PoE-supported network
cameras which are connected to the RJ-45 service ports.
!
Power LED
Power LED indicates the system's power on/off status.
The LED lights up in red to indicate the system is powered on.
