12
Part 1 - Introduction
LED Status Indications
Mode
Status
Color
Description
L/A
(Link/Activity)
On
Amber
Normal network connection at 10/100Mbps
Blinking
Amber
Data transmission over the network in progress at
10/100Mbps
Off
-
No network connection or a problem with the connection
PoE
On
Green
Connected and transmits power over the network normally to
an IEEE 802.3af PoE-supported network camera
Off
-
Not connected to a PoE-supported network camera
3
RJ-45 Uplink Ports
RJ-45 uplink ports are used to connect the switch to a higher tier device. These ports are
useful when cascading multiple network devices.
• If not using for uplinking purposes, these ports can be used as service ports, but they do not
support PoE.
• Each port is enabled with Auto-MDI/MDI-X detection.
• The ports operate in different modes based on the network speed. (10/100Mbps: full/half
duplex, 1000Mbps: full duplex)
5
RJ-45 Uplink Port LEDs
These LEDs indicate the status of the RJ-45 uplink ports.
The LED color indicates connection and communications speeds with the connected device.
