Costar CDI125360V, Руководство по эксплуатации

Страница: 32 / 49

Part 1 - Remote Setup
32
Settings
Select the
Settings
tab and configure recording
settings.
•
Recording Stream
: Choose a stream to use for
recording. It’s possible to designate different streams
for different recording modes.
- Time-Lapse/Pre-Event : Designate the stream to
use for recording in time lapse mode or event mode
(pre-event).
- Event : Designate the stream to use for recording in
event mode (post-event).
• Recordings saved on the SD memory card can be
searched and played back from the iNEX Basic
program or remotely from the remote program.
For more information, refer to each program's
operation manual
.
• Video search and playback may not function
properly on the remote program while video is
being recorded on to the SD memory card.
To remove the SD memory card, unselect the Record
option and wait 30 seconds before doing so. Removing
the SD memory card while recording is in progress of
without waiting 30 seconds can damage the system
and/or the recording data.
Event
Configure event detection settings.
Alarm In
Select Alarm In to enable alarm in event. With alarm
in event enabled, alarm in detections by the alarm in
connector will be assumed as events.