Quick Guide
3
2.
Installation
This chapter describes the way to install NVR.
When installing a device, connect rear of the device with each port on the basis of below connection map.
The device starts first like below sequences:
1
Installing HDD
2
Connecting with an exterior device
3
Starting a system
4
Setting an quick setup
2.1
Installing HDD
How to install HDD in the device:
Attention
Withdraw the mains plug before installing HDD to reduce the risk of injury or
electrical shock, or device malfunction.
Make sure to check the compatibility of HDD with the device.
1
Always switch off and unplug the unit.
2
Unscrew with a screw driver (+) and open the unit cover.
3
Unscrew HDD set screws of the bracket to disassemble.
4
Install HDD in the HDD bracket.
5
Fix the HDD-installed bracket with the unit.
6
Connect a data cable and power cable with HDD.
7
Close the cover and tighten screws.
