01
WARNING
EQUIPMENT MISUSE HAZARD
•
Equipment misuse can cause the equipment to rupture or malfunction and
result in serious injury.
•
This equipment is for professional use only.
•
Read all instruction manuals, tags, and labels before operating the
equipment.
•
Use the equipment only for its intended purpose.
•
Do not alter or modify this equipment.
•
Check equipment daily. Repair or replace worn or damaged parts
immediately.
•
Do not exceed the maximum working pressure of the lowest rated
component in your system.
•
Use fluid sand solvents which are compatible with the equipment wetted
parts.
•
Do not use hose stop all equipment.
•
Route hoses away from traffic areas, sharp edges, moving parts, and hot
surfaces.
•
Do not expose hose to temperatures above 82C(180F) or below–4C(–40F).
•
Do not lift pressurized equipment.
•
Wear hearing protection when operating this equipment.
•
Comply with all applicable local, state, and national fire, electrical, and safety
regulations.
SKIN INJECTION HAZARD
•
Hazard out fluid or toxic fumes can cause serious injury or death if splashed
in the eyes, on the skin, inhaled, or swallowed.
•
Know the specific hazards of the fluid you are using.
•
Store hazard out fluid in an approved container. Dispose of hazard out fluid
according to all local, state and national guide lines.
•
Always wear protective eyewear, gloves, clothing and respirator as
recommended by the fluid and solvent manufacturer.
•
Pipe and dispose of the exhaust air safely, away from people, animals, and
food handling areas. If the diaphragm fails, the fluid is exhausted along with
the air.
WARNINGS
The
following
are
general
warnings
related
to
the
setup,
use,
grounding,
maintenance
and
repair
of
this
equipment.
Additional,
more
specific warnings
may
be
found
throughout
the
body
of
this
manual
where applicable.
Symbols
appearing
in
the
body
of
the
manual
refer
to
these general
warnings.
When
these
symbols
appear
throughout
the
manual,
refer back
to
these
pages
for
a
description
of
the
specific
hazard.
COSMOSTAR
Fluid Handling Equipment
e-mail:
