Cosmo COS-QS90, Инструкция по установке, использованию и уходу

Страница: 17 / 21

RECIRCULATING FILTERS INSTALLATION
Skip this page if you are installing a Ducted Range Hood.
Charcoal Filters are only included with Ductless Models
B
efore installing
m
ake sure the unit is powered off and unplugged.
Filter Ring Carbon Filter
AFTER CARBON FILTER INSTALLATION
Note: This is a top venting unit and a hole must be cut into the cabinet for proper installation.
Installing Recirculating Filters (For Ductless Model Only)
1. Remove the permanent filters from the Range Hood
2. Locate fig.1, unscrew the 6 screws along the Motor Ring (metal circle).
3. Take your Filter Ring and align the holes on the Motor Ring to the holes of the Filter Ring.
4. Screw the Filter Ring into Motor Ring.
5. Take the Carbon Filter and lock into Filter Ring by aligning the two tabs and twisting.
6. Repeat Steps 1-5 on the other side.
7. Reattach the Permanent Filters.
The carbon filter must be replaced every 4-6 months depending on use.
Additional Aluminum or Permanent Filters can be purchased from
15