The appliance has been manufactured as a class
I
appliance
, therefore
earth cable is necessary.
The connection to the mains is carried out as follows:
•
The minimum distance between the support surfaces of the cooking pots on
the
stove
top and the
bottom
of the cooker hood must be at least
26 inches
.
If
a connection tube composed of two parts is used, the
upper part must be placed outside the lower part. Do not connect the cooker
hood exhaust to the same conductor used to circulate hot air or for
evacuating fumes from other appliances generated by other than an electrical
source. Before proceeding with the assembly operations, remove the
anti-grease filter(s) (Fig.12) so that the unit is easier to handle.
If the
cooker hood will vent the air to the outside of the building,
prepare
the hole for
evacuation of the air.
• Hood assembly
Remove the structure from the packaging and separate the upper
and lower
part
s.
IEC227
North America
L=live
Brown
Black
N=neutral
Blue
White
E=earth
Green/Yellow
Green
If not provided, connect a plug for the electrical load indicated on the
description label. Where a plug is provided,
the cooker hood must be installed in order
for
the plug
to be
easily
accessible. An omni
-
polar switch with a minimum opening of 3mm
between contacts, in line with the electrical load and local standards, must
be placed between the appliance and the network in the case of
direct connection to the electrical network.
Содержание COS-HAF859
