-
If the cooker hood is supplied with a lower chimney piece that must be
fixed to the hood body with screws, remove the anti-grease filters from
the hood by
releasing
the
filter latches
(Fig.12). Then screw the lower
chimney piece pipe to the inside of the hood, using screws
P
(Fig.13).
Put the grease filters back in place
.
USE AND MAINTENANCE
•
It is recommended to operate the appliance prior to cooking.
It is recommended to leave the appliance in operation for 15 minutes after
cooking is terminated in order to completely eliminate cooking vapours and
odours.
Proper
function
ing
of the cooker hood
relies on
regular
maintenance,
and
cleaning the grease filters, in particular.
•
The anti-grease filters capture the grease particles suspended in the air, and
are therefore subject to clogging
based on
the amount of use of the
appliance
.
In order to prevent fire hazard, it is recommendable to clean the filter at a
maximum of
every
2 months by carrying out the following instructions:
- Remove the filters from the cooker hood and wash them in a solution of
water and neutral liquid detergent,
and
leaving
them
to soak.
- Rinse thoroughly with warm water and leave
them
to dry
.
The filters may also be washed in the
dishwasher.
The aluminum panels may alter in color after several washes.
This is
expected, and will not be a valid reason for replacements or returns.
•
The active carbon filters purify the air
and send them back into the environment.
The filters are not washable nor re
-
useable and must be replaced at
a
maximum
Содержание COS-HAF859
