6
7
Package contents
• Dishwasher
• Hose
• Hose clamp
• Top mounting clips (2)
• Wood screws (4)
• User Guide
• Installation Guide
Interior
Control panel
Note:
You need to purchase the installation kit in order to install your dishwasher.
#
ITEM
DESCRIPTION
1
Cycles
Select a cycle based on the type of dishes and how
dirty they are. See "Cycles" on page 8 for more in-
formation.
2
Options
Options add enhancements to your selected cycle.
See "Options" on page 8 for more information.
3
Controls and indicators
Start or stop your wash cycle and check its status.
See "Controls and indicators" on page 8 for more
information.
Setting up your dishwasher
For complete instructions on installing and setting up your dishwasher, see the included
Installation Guide
.
Finding a suitable location
• The dishwasher must be installed so that the drain hose is no more than 10 feet (3.01 m) in length, for proper drainage.
• This dishwasher is designed to be enclosed on the top and on both sides by a standard residential kitchen cabinet unit.
• The installation enclosure must be clean and free of any obstructions.
• The enclosure must be at least 24 inches (61 cm) wide, 24 inches (61 cm) deep, and 34 inches (86.4 cm) high.
• For the front door of the dishwasher to be flush with the front edge of the counter top, the counter top must be 25
inches (63.5 cm) deep.
Before using your dishwasher
1
Remove the interior packing.
2
Clean the interior surface with lukewarm water using a soft cloth.
3
Make sure that the water supply temperature is between 120°F and 149°F (49°C and 65°C).
4
Make sure that your dishwasher is connected to a grounded 120V, 60Hz power supply.
5
If the dishwasher is damaged, please contact Customer Service.
If installing into a corner, allow 2 in. (5.08 cm) min. clearance between dishwasher and adjacent cabinet, wall, or other
appliances. Allow 25-5/8 in. (65.1 cm) min. clearance from the front of the dishwasher for opening the door.
