Cosmo COS-DFR304, Инструкция по установке и эксплуатации

Страница: 20 / 46

20
·When use a wok ,make sure you hold the handle of a wok or a small one-handled pot while
STEP 2: SURFACE BURNERS
To replace the nozzles of the surface burners, lift up the burners and unscrew the nozzles
shipped with the range using a 7mm socket wrench.
Replace nozzles using the conversion kit. Contact Cosmo Customer Service at 1-888-784-
3108, or go to www.cosmoappliances.com to purchase a conversion kit. Each nozzle has a
number indicating its flow diameter printed on the body.
STEP 3: ADJUSTMENT OF MINIMUM FLAME SETTING
WARNING: These adjustments should be made only for use of the appliance with
natural gas. For use with liquid propane gas, the choke screw must be fully turned in a
clockwise direction.
SURFACE BURNERS
1.) Light one burner at a time and set the to the MINIMUM position(small flame).
2.) Remove the knob.
3.) The range is equipped with a safety valve. Using a small-size slotted screwdriver, locate
the choke valve on the valve body and turn the choke screw to the right or left until the burner
flame is adjusted to desired minimum.
4.) Make sure that the flame does not go out when switching quickly from the MAXIMUM to the
MINIMUM position.
GAS CONVERSION