Properly Seated
Not Properly Seated
STEP 3 - ADJUST BURNER FLAMES
NOTES:
•
Turn all burners on highest setting and check the flames. They should be blue in
color and may have some yellow tipping at the ends of the flame when using LP
gas. Foreign particles in the gas line may cause an orange flame at first, but this
will soon disappear.
•
Turn the cooktop burner knob to “LO” while observing the flame.
•
Adjustments must be made with two other burners in operation on a medium
setting. This prevents the upper row of flames from being set too low, resulting
in the flame being extinguished when other burners are turned on.
To adjust flame height:
Adjust the height of burner flames. The cooktop “low” burner flame should be a
steady blue flame approximately 1/4" (6.4 mm) high.
a
b
a
Low Flame
b
High Flame
To adjust standard burner:
The flame can be adjusted using the adjustment screw in the center of the valve
stem. The valve stem is located directly behind the control knob.
If the low flame needs to be adjusted:
MAX
MIN
OFF
a
b
a
Adjustment Screw
b
Control Knob Stem
1.
Light one burner and turn the control knob to the lowest setting.
27
