background image

Read all instructions before using this appliance.

 

Save these instructions for future references

Approved for residential appliances

For residential use only

 

IMPORTANT SAFETY INSTRUCTIONS

CAUTION

FOR GENERAL VENTILATING USE ONLY. DO NOT USE 

TO EXHAUST HAZARDOUS OR EXPLOSIVE MATERIALS 

OR VAPORS.

IMPORTANT SAFETY INSTRUCTIONS

WARNING

GROUNDING INSTRUCTIONS

This  appliance  must  be  grounded.  In  the  event  of  an  electrical 

short  circuit,  grounding  reduces  the  risk  of  electric  shock  by 

providing an escape wire for the electric current. This appliance 

is equipped with a cord having a grounding wire with a grounding 

plug.  The  plug  must  be  plugged  into  an  outlet  that  is  properly 

installed and grounded.

WARNING - IMPROPER GROUNDING CAN 

RESULT IN A RISK OF ELECTRIC SHOCK.

Consult

 

a

 

qualified

 

electrician

 

if

 

the

 

grounding instructions are 

not completely understood, or if doubt exists

 

as

 

to

 

whether

 

the

 

appliance

 

is properly grounded.

Do  not  use  an  extension  cord.  If  the  power  supply cord is too 

short, have a qualified electrician install an outlet near the 

appliance.

CAUTION

To reduce risk of fire and to properly exhaust air, do not 
vent exhaust air into spaces within walls, ceilings, attics, 
crawl spaces, or garages.  

WARNING

TO REDUCE THE RISK OF FIRE, USE ONLY METAL 

DUCT WORK.

 

Install this hood in accordance with all 

requirements specified.

WARNING

TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO 

PERSONS, OBSERVE THE FOLLOWING:

Use this unit only in the manner intended by the 

manufacturer. If you have questions, contact the 

 manufacturer

B.

 

Before servicing or cleaning the unit, switch power 

off at service panel and lock service panel disconnecting means to prevent 

power from 

being switched on accidentally. When the service disconnecting means 

cannot be locked, securely  fasten a prominent warning device, such as a 

tag, to the service panel.

C.

 

Installation Work and Electrical Wiring Must Be Done 

By Qualified Person(s) In Accordance With all

 Aplicable Codes & 

Standards, Including Fire-rated Construction.

exhausting of gases through the flue (Chimney) of fuel

 

burning equipment to 

prevent back- drafting. Follolow

 

the heating equipment manufacturers 

guideline and safety standards such as those published by the National Fire 

Protection Association (NFPA), the American Society for Heating, 

Refrigeration and Air Conditioning Engineers (ASHRAE), and the local code  

authorities.

When cutting or drilling into wall or ceiling, do not 

damage electrical wiring and other hidden utilities. 

Ducted systems must always be vented to the  outdoors.

A.

E.

F.

D.

 

Sufficient air is needed for proper combustion and 

WARNING

To Reduce The Risk Of Fire Or Electric Shock, Do 

Not Use This Hood 

With Any External Solid State 

Speed Control Device.

WARNING

WARNING

Unplug  or  disconnect  the  appliance  from  the power supply 

before servicing.

TO REDUCE THE RISK OF INJURY TO PERSONS, IN THE EVENT OF A

RANGE TOP GREASE FIRE, OBSERVE THE FOLLOWING:

A. SMOTHER FLAMES with a close-fitting lid, cookie sheet, or metal tray, then

turn off the burner. BE CAREFUL TO PREVENT BURNS. If the flames do not go

out immediately, EVACUATE AND CALL THE FIRE DEPARTMENT.

B. NEVER PICK UP A FLAMING PAN 

 You may be burned.

C. DO NOT USE WATER, including wet dishcloths or towels 

 a violent steam ex-

plosion will result.

D. Use an extinguisher ONLY if:

1

) You know you have a Class ABC extinguisher, and you already know how to

operate it.

2

) The fire is small and contained in the area where it started.

3

) The fire department is being called.

4

) You can fight the fire with your back to an exit.

Always leave safety grills and filters in place.Without these components, 
operating blowers could catch onto hair, fingers and loose clothing.

The manufacturer declines all responsibility in the event of failure to observe 

the instructions given here for installation,maintenance and suitable use of the 

product. The manufacturer further declines all responsability for injury due to 

negligence and the warranty of the unit automatically expires due to improper 

maintenance.

2

WARNING

WARNING – TO REDUCE THE RISK OF A RANGE TOP GREASE FIRE:

A.  Never  leave  surface  units  unattended  at  high  settings.  Boilovers
cause smoking and greasy spillovers that may ignite. Heat oils slowly
on low or medium settings.

B. Always turn hood ON when cooking at high heat or when flaming food
(i.e. Crepes Suzette, Cherries Jubilee, Peppercorn Beef Flambe).

C. Clean ventilating fans frequently. Grease should not be allowed to ac-
cumulate on fan or filter.

D. Use proper pan size. Always use cookware appropriate for the size of
the surface element.

Содержание COS-5MU30
















Отзывы: