45 mm
．
560
mm
．
IMPORTANT:
Installation must be in compliance with the consumption declaration.
In order to ensure adequate ventilation, the back panel of the cabinet unit must be removed. Installing
the oven so that it rests on two strips of wood is preferable. If the oven rests on a continuous, flat
surface, there must be an aperture of at least
1 ¾” x 22” (45 x 560mm). (See Figure 2)
The panels of the adjacent cabinets must be made of heat-resistant material. In particular, cabinets
with a veneer exterior must be assembled with glues which can withstand temperatures of up to 100
degrees Celsius.
In compliance with current safety standards, contact with the electrical parts of the oven must not be
possible once it has been installed.
All parts, which ensure the safe operation of the appliance, must be removable only with the aid of a
tool.
To fasten the oven to the cabinet, open the door of the oven and attach it by inserting the 4 wooden
screws into the 4 holes located on the perimeter of the frame.
Figure 2
