Cosmed K4B2, Руководство пользователя

Страница: 40 / 42

40 - K4 b
2
User Manual
Software installation
The software is made of two programs: one for the ergometry and the other one for the
spirometry (option). The two programs share the same archive and use the same
program for the system calibration, even if they are used for performing completely
different tests.
Installing the software
1. Select
Run...
from Windows
Start
menu.
2. Insert the disk in the proper drive.
3. In the Command line, type
<name of the drive>:\install
.
4. Click on
OK
(or press
ENTER
key).
5. The program will load up a dialog box and ask for a directory where to be installed.
6. When the installation is over, the program will advise you with a message
indicating that the installation has been successfully completed, click on
End.
Note:
the directory for the Spiro software must be the same of the K4 b
2
(ergo).
Run the software
1. In the Windows
Start
menu, open the Program Group in which the software was
installed.
2. Click the
K4 b
2
icon.
PC port configuration
The first time the software is used, it is necessary to configure the communication port
with the PC (USB, COM1, COM2,…).
For further details, see the chapter
Database management
.
sss
Notice : The software is
copy-protected. Install the
software from the original
disk.