Cosmed K4B2, Руководство пользователя

Страница: 32 / 42

32 - K4 b
2
User Manual
Installation sequence
Before starting operating with the system make sure to meet the environmental and
operational conditions reported in Chapter 1.
Battery Charger Unit
The Battery Charger Unit allows the following functions:
•
Charge 3 rechargeable batteries simultaneously.
•
Charge batteries by means of the car lighter plug.
•
Supply the K4 b
2
Portable Unit directly by the main power.
Check voltage
The Battery Charger Unit is provided with a switch that allows to change the voltage
according to the following values:
•
115V 50-60 Hz (100V-120V)
•
220V 50-60 Hz (200V-240V)
To change setting, move the switch on the new voltage by using a small screwdriver or
a pen.
Turn the Unit on
1. Connect the Charger Unit to the main plug.
2. Turn on the Unit by pressing the orange power switch.
Charge the batteries
1. Insert the batteries into the places on the top of the unit as shown in the illustration
below.
2. The small green LED placed on the front panel warns the charge in progress. The
battery is charged when the light signal placed on the front panel of the Charger
Unit starts blinking.
Note: USA and Japan versions have not the antenna connector on the battery.
sss
Warning : Before turning the
Battery Charger Unit on, check
the voltage switch selected
meets your main voltage.