9
Gebruiks- en montagehandleiding inbouwbranders/ Operating and assembly instructions built in burners / manuel de montage et mode d'emploi
2 . Installation instructions according collection: built in burners
The Cosi built in burner is supplied complete with pressure regulator (30 mbar) and gas hose. You only need to
purchase a propane gasbottle. These can be purchased at your local gas supplier.
1. Installing the Cosi built in burner
Get your Cosi built in burner carefully from its packaging. Select the location for your Cosi built in burner. The
location must meet the following conditions:
-
Make sure that the built in burner is placed on a unflammable surface. The surface should be
completely flat and clean. The built in burner may not installed in materials who conduct the heat.
Don’t place the build in burner in steel, metal of glass surface
-
The Cosi built in burner should be placed at least two meters away from flammable materials and
liquids.
Make a recess in for example the gardentable of a different place you are willing to install the insert burner
2. Placing lavastones and eventual ceramic stones
I
f the Cosi built in burner is installed properly, you can place lava rocks and eventual ceramic logs on the top.
Grab first the small lava stones and place them on the ground. Every Cosi fires is delivered with 1.5kg small lava
stones and 1.5kg large lava rocks included. Take the small lava stones without grit and place it gently on the
model Repeat the same with the big lava stones and make sure it is covered with lava rocks. Make sure you
keep the ignition unit free of lava stones
.
If you place ceramic logs lay them as a campfire in the fire ring. Make sure the fire ring is minimal covered by
the logs. When the logs block the fire ring, there will be a dangerous situaties. The blockade of the fire ring will
affect the air flow of the ring and the flames will be different. This results in dangerous situations!
If you want to reorder the lava stones or ceramic logs, this is possible at your purchase address.
When you are going to use the Cosi built in burner for the first time, make sure that the device is turned at the
highest setting for 15 minutes. In this way, the lava stones are heated through and this ensures that any bumps
or air bubbles will disappear from the lava rocks
When you want to move or cleanup the lava stones and ceramic logs, make always sure that they have cooled
down completely.
The lava rocks and logs can be scorching black in time. This has to do with soot formation which always occurs
in devices which show a yellow flame. This soot can be removed by blowing / vacuuming with a vacuum
cleaner. The carbon black may be also brushed off with a dry brush.
350
mm
350 mm
350 mm
350
mm
Recess square built in burner
470 mm
270
mm
470 mm
270
mm
Recess rectangle built in burner
