15
3. User manual
-
Always make sure that the instructions in this user manual are followed precisely. If these instructions
are not followed correctly, this can result in fire or explosion that could cause damage to persons,
property, or loss of life. Never use flammable liquids or vapors in the vicinity of a burning device.
-
Improper installation, adjustments or modifications to the equipment can result in injury or property
damage. Read the installation instructions, safety precautions and operating instructions very
carefully.
-
Do not leave the Cosidesign Line unattended when it is in use or when it is connected to a gas bottle.
-
What to do if the device emits a smell of gas:
o
Shut off the gas bottle immediately and contact a technical gas specialist. Do not use the
device until it is approved for use again.
-
Installation, maintenance, and service needs to be performed by a qualified gas technician in these
cases.
-
Only use the Cosidesign Line outdoors or in a well-ventilated area. Never use the Cosidesign Line
inside a building, house, garage, or any other enclosed area.
-
Gas bottles must be stored outdoors and in well-ventilated areas. Make sure that gas bottles are out
of the reach of children.
-
The Cosidesign Line is best stored in a garage or well-ventilated area. Store the Cosidesign Line only
when it is disconnected from the gas bottle.
-
The Cosidesign Line is not qualified as a cooking appliance and therefore must not be used as a
cooking appliance.
-
Check for gas leaks at least once a month and every time a change is made to the unit.
-
Keep the area around the Cosidesign Line clear of combustible liquids, materials, and vapors. Never
throw anything into the flames of the Cosidesign Line.
-
Never use a fuel other than propane gas.
-
Always place the gas bottle in an upright position; the gas bottle must never be placed lying down or
at an angle in the appliance.
-
What to do if something goes wrong?
Of course, we do everything we can to make a safe product. Therefore, always follow all instructions
and directions in this user manual:
Extinguishing instruction Cosi fire pit tables
If something goes wrong, it is important to stop the gas supply as soon as possible. Immediately turn
the control button to "off" to stop the gas supply. In most cases the flame will extinguish immediately.
If there is a gas leak in the gas hose that prevents the flame from extinguishing, the flame can be
extinguished with a fire blanket or a powder extinguisher. With the fire blanket you can extinguish the
fire at an early stage. In addition, a powder extinguisher is suitable for extinguishing the fire of
propane / butane gas. Never extinguish with another type of fire extinguisher.
Turning on the Cosidesign Line
-
Make sure the Cosidesign Line is stable and in solid state.
-
If a protective cover is present: Remove this protective cover.
-
Press the control button fully until you hear a slight ticking sound (this is the piezo ignition). If you
don’t hear anything when pressing the ignition button,
you probably need to replace the battery. Keep
the control button pushed in when you open the gas supply and turn the control button to ‘HIGH’ for
gas supply. The burner should now ignite within 15 seconds. When the burner produces a complete
flame, hold the control button for another 15 seconds. The flame should keep burning now. In case
the flame goes out however, you should try the same process again and hold the gas supply button a
little longer.
Switching off the Cosidesign Line
-
Turn the
control button towards ‘
OFF
’ to extinguish the flame. When the flame is extinguished
entirely, you shut off the gas valve on the gas bottle.
-
Let the lava rocks and ceramic logs cool down completely and optionally: place the protective cover
over the Cosidesign Line.
