Cosen SH-7550S, Инструкция по эксплуатации, Страница: 53 / 118

4 ‐ 19
Vibration damper
The vibration damper can be assembled to the left saw arm. This accessory
is extremely useful in reducing the high ‐ frequency noise produced when
cutting large ‐ sized material.
OPTIONAL ACCESSORIES
Hydraulic lifting take ‐ in roller with powered feeding table

While lifting your work material with a crane onto the machine
workbed, turn the hydraulic lifting roller up/down selector switch
to the right to lift up the rollers.

While the lifting rollers are in the upper position, press the shuttle
bed forward/backward buttons to send the material to the
desired position with aid of the two ‐ speed mode to select from.
Vise pressure regulator
These regulators control the clamping pressure for the vises and the
top clamps. When cutting pipes or softer materials, the clamping
pressure of the vises and top clamps need to be adjusted to avoid
damages to the material surfaces. Adjust the clamping pressure
according to the material you cut.
Do not adjust clamping pressure during operation.
The clamping pressure shall not be less than 8 kg/cm2.
2M roller table

The optional 2M roller table supports the work material and ensures
the material be fed in smoothly.

Refer to section 9 for further information on adjusting the roller
table.