Cosen SH-7550S, Инструкция по эксплуатации, Страница: 46 / 118

4 ‐ 12
No. Item Function Description
When the blade completes each cut and triggers the lower
limit switch, the saw blade icon will turn solid white.
12
Vise status indicator Indicates if the vise have clamped and secured the
workpiece.
When the vise have secured the workpiece, the clamping
vise icon on the right will turn solid green.
13
Blade speed display
Displays current blade speed.
14
Blade motor amp draw
(optional)
The current in Amps drawn by the blade motor displayed on
this page if the optional accessory, Motor Amp Draw, is
purchased.
15
Cutt rate display
(optional)
Displays the current cut rate.
Cut rate value is available only if the material width is
entered.
16
System parameter
setting
Press this button to set up system parameters. Password is
required.
All parameters have been set up by the manufacturer.
In order to prevent random change from being made to
these parameters and affect cutting precision and machine
life, this function is protected with a set of password.
17
Cutting parameter
setting
Press this button to display cutting ‐ related information e.g.
blade height, blade speed, cutting rate and etc.
Blade deviation detector (optional) can be also configured in
this setup page.
Refer to Cutting Display & Setup in the following page.
18
Material cutting
reference
This 2 ‐ page reference chart lists out the required blade
speed and cutting rate for each different material.
19
PLC monitor
Shows current PLC signals.
20
Error report
Lists a historical report of the errors and the time of
occurrence as well as provides troubleshooting support. 6
pages in total.
21
(yellow highlight)
Error display Displays error messages in the order of occurrences; press
the message for three seconds to clear the messages.
The message must be cleared for the machine to
continue to operate normally.