1 Terminal Block
AD-10
l
AD240
l
AD960
l
AD480
+Output
-Output
Frame ground
Input voltage selecting terminal
Short: AC 85 - 132V Open: AC170 - 264V
AC(L)
AC(N)
Output voltage adjustable potentiometer
Frame ground
Input voltage selecting terminal
AC(N)
AC(L)
Output voltage adjustable potentiometer
+Output
-Output
Remote ON/OFF(RC)
Remote ON/OFF(RCG)
Voltage balance(VB)
Current balance(CB)
Frame ground
AC(L)
AC(N)
Output voltage adjustable potentiometer
+Output
-Output
2 Function
2.1 Input voltage range
2.2 Inrush current limiting
2.3 Overcurrent protection
n
n
n
n
n
n
n
n
n
n
n
n
The range is from AC85V to AC132V or AC170V to AC264V (user
selectable).
Short
AC85V to AC132V
Open
AC170V to AC264V
Short-piece should be attached as per above drawing.
AC input voltage must have a range from AC170V to AC264V or
DC240V to DC370V for normal operation. If the wrong input is ap-
plied, the unit will not operate properly and/or may be damaged.
The thyristor technique is used for protection from inrush current.
By changing the input voltage selector between VS1 - VS2 (short
or open), either AC100V or AC200V is possible.
The unit is shipped from the factory for AC200V (open condition). In
the case of AC100V, install the short-piece between VS1 and VS2.
If the wrong connection is made for short/open, the power supply
may be damaged. The input voltage should be within the above
range.
The range is from AC170V to AC264V or DC240V to DC370V.
Inrush current limiting is built-in.
If a switch on the input side is installed, it has to be the one han-
dling the input inrush current.
When power is turned ON/OFF repeatedly within a short period of
time, it is necessary to have enough time between power ON and
OFF to operate resistance circuit for inrush current.
The overcurrent protection circuit is built-in to prevent the unit
from a short circuit and overcurrent condition. The unit automati-
cally recovers when the fault condition is cleared.
In cases that conform with safety standard, input voltage range is
AC200-AC240V(50/60Hz).
l
l
AD240 AD480
AD960
AD
Short: AC 85 - 132V Open: AC170 - 264V
Instruction Manual
AC-DC Power Supplies Enclosed type
June 29, 2011
