8
6) Install the Seat Cushion and Back Cushion
Attach the Seat cushion (17) and Back cushion (18) to the Seat cushion frame (19) with eight
Bolts (15) and Flat washers (13). (Refer figure 6)
7) Install the Left and Right Handlebar Tubes
Connect the Sensor wire II (58) from the Left and Right
handlebar tubes (6,20) to the Sensor
wire I (55) from the Seat cushion adjustor (4). Attach the
Left and Right handlebar tubes (6,20)
to the Seat cushion adjustor (4) with four M8X20 Bolts (14)
and Arc washers (12). (See figure 7)
8) Adjustment of the Seat cushion Adjustor
Release and pull the Round knob (32) and then insert the Seat cushion adjustor (4) into the tube
of Main Frame (30). Adjust the Seat cushion adjustor (4) to the desired hole for the appropriate
position and tighten the Round knob (32) after adjustment. (Refer figure 8)
9) Install the Left & Right Pedals
Attach the Left & Right pedals (59) to the Crank axis (29). The Left Pedal (59) should be threaded
on counter-clockwise. The Right Pedal (59) should be threaded on clockwise. (Refer figure 9)
NOTE:
The Left & Right Pedals (59)
and Crank axis (29)
are marked with “
L
” & “
R
”.
