Cosatto HUG Nitty Gritty, Руководство пользователя

Страница: 8 / 28

Seat:
Starting on one side carefully pull the cover off the seat (f). At the rear of the
backrest lift the elastic strap over the headrest (g). Push the harness adjuster strap
through the elastic loop under the harness adjuster flap (h) then pull the cover from
around the adjuster button (i). Unclip the six elastic loops holding the cover to the seat
(j) and remove the cover.
Side impact protection block cover: Carefully pull the cover off (k).
IMPORTANT: The covers are a safety feature. NEVER use the child car seat
without them.
16 - refitting the seat cover
Ensure the sponge pad is placed on the seat (a).
Fit the side impact protection block covers by stretching the cover over the impact pads (b).
Place the cover on the seat.
Fit the elastic strap over the headrest (c).
Fit the six elastic loops on the inside of cover to the mounting points on the seat (d). Fit
the cover around the adjuster button (e) then push the harness adjuster strap through
the elastic loop under the harness adjuster flap (f).
Stretch the cover over the seat and backrest (g) ensuring the elastic edging tucks inside
the seat structure and secures the cover to the seat.
17 - refitting the headrest cover
Fit the elastic loop (a) through the slot in the vehicle seat belt lock.
Fit the elastic lool under the vehicle seat belt lock (b).
Close the vehicle seat belt lock (c).
Stretch the cover over the headrest (d) ensuring the elastic edging tucks inside the
headrest structure and secures the cover to the headrest.
18 - refitting the harness for group 1 use - part 1
If required, release the harness adjuster strap. Open the seat to gain access to the rear.
See step 5.
Open the lower belt clip (a) and unwrap the harness adjuster strap from the lower belt
clip retaining rod (b). Push the harness connector through the hole in the lower belt
clip (c) then from the front of the child car seat pull the harness adjuster strap out from
under the harness adjuster flap (d).
Close the lower belt clip. Close the seat and refit the upper and lower locking bars.
19 - refitting the harness for group 1 use - part 2
Release the harness from the restraint system if required.
Feed the crotch harness through the slot in the seat liner and seat cover (a). Push the
crotch harness clip through the slot in the seat (b). Flatten the clip to secure.
Fit the waist harness clips through the slots in the seat cover and seat (c). Push the clips