11.
Will I be able to connect flash drive etc. to the USB port?
NO.
USB port is for charging only.
12.
How to remove radio from dashboard
1.
Pry out on the ride control switch and disconnect the wiring.
2.
Unsnap the switch trim and remove (2) 10mm hex-head bolts exposed.
3.
Open the center console door, remove (4) screws from the inner hinge
and remove the door.
4.
Open the ashtray and remove (1) screw exposed.
5.
Remove the ashtray and (1) screw exposed.
6.
Unclip the small grill to the left of the ignition switch and remove (1)
screw exposed. Unclip the base of the radio trim bezel and remove or
copy and paste link below into browser:
https://www.youtube.com/watch?v=WTbWYNJTSDs
12.
I have installed the kit as directed, but radio does not enter AUX mode.
What could be wrong?
We recommend resetting system as follows:
1.
Disconnect car battery or 20-pin plug from radio (See
Fig. 1
)
2.
After 10-15 minutes reconnect car battery or radio’s 20-pin plug
(whichever was initially disconnected)
3.
Press AUX button on radio and if all went well radio should now enter
AUX mode.
Disclaimer
• This product has no affiliation with GM or Apple
• When possible, professional installation is recommended
© 1995-Sep-21 Discount Car Stereo, Inc. All rights reserved. Information in this document is
subject to change without notice. Other products and companies referred to herein are
trademarks or registered trademarks of their respective companies or mark holders.
