3.
Snap USB head (See
Fig. 12
) to hole in panel until flush with surface (See
Fig. 13
)
Fig. 12
USB head
Fig. 13
Flush mounted to dash
B.
Bracket Mount
(No drilling)
1.
Locate a flat surface at location of choice within 3.2 ft. of radio to mount
USB support bracket (See
Fig. 14
)
2.
Use tape backing or screws to secure bracket
Fig. 14
mounting bracket
3.
Insert 3ft. through hole in bracket (See
Fig. 15
) and connect to USB port
on installation harness (See
Fig. 11
)
Fig. 15
4.
Snap USB head to bracket until flush (See
Fig. 16
)
Fig. 16
Alternate: Connect audio device charging cable directly to USB port on harness
(See
Fig. 11
) and route the plug to dash area or where audio device will reside.
