Fig. 5
C5 interior fuse box (
yours may be different
)
Noteworthy
: If streaming is interrupted when headlights, wipers, defroster,
A/C; the 12V circuit used to power module is somehow being drown down by
these accessories.
To resolve find an alternate 12V ACC circuit to power
module.
Also, on rare instances if smartphone volume is set too high, it will
“clip”
and
module will un-pair and reconnect intermittently.
To resolve, lower volume on audio device.
The A2D-C5 with PXHGM2 harness turns does not work on retain
accessory power (RAP) and will turn on/off with ignition key.
12.
Tuck and secure any extra wires away from moving parts and
proceed to
“Pairing”
Pairing
Pairing process varies among devices but the process is the same. These steps are
done upon initial install and will not have to be repeated. The range on this device is
approximately 30 ft., so operation is possible if audio device is within range.
1.
Turn Ignition and r
adio “ON”
Green LED inside module peephole will flash (pairing mode)
2.
On A2DP device: Go to
Settings, Wireless & Networks, Bluetooth
Settings
3.
Select
Bluetooth
and turn on.
4.
Select Bluetooth settings
5.
Tap
Scan (Search) for devices
.
6.
Wait for Bluetooth device name (See below) to appear and select it.
Green LED inside module peephole will glow steady (paired)
