Cortex Omega CUKR-10, Руководство пользователя

Страница: 10 / 13

- 9 -
Step 3
1. Install the Cushion (57), Slider bar (63), Weight block (10KG) (58) and Weight (59) in sequence
into the Weight frame (7).
2. Lock the Slider bar (63) to the Weight frame (7) with the E snap ring (66).
3. With the sequence from small to big, from up to down, stick the weight notes on the Weight
block(10kg) (58).
4. Lock the four Weight blocks (10kg) (58) to the Pull rod (61) with the Bolt (54), Flat washer (75)
and Nylon nut (56). And then install the Plug pin (65) to the Pull rod (61).
Step 4
1. Lock the Cable (71) to the Guide plate (5).
2. Install the Cable (71) according to the direction of arrow; (Notice: Through the Cable (71) from
the A hole of Upper horizontal frame (3) and through it out from the B hole of Upper horizontal
frame (3).)
3. Lock the Alloy sleeve (46) , Pulley cover (49) and Pulley (50) to the Upper horizontal frame (3)
with the Bolt (51), Flat washer (36) and Nut (45); and then lock the Alloy sleeve (46) , Pulley cover
(47) (48) and Pulley (50) to the Upper horizontal frame (3) with the Bolt (51), Flat washer (36) and
Nut (45).
4. Install the coil of the Plug pin (65) to the bolt of the Cable (71), and then lock the bolt of the
Cable (71) to the Pull rod (61).