Parts Diagram and Functions
Top Panel-Mixer Section
12.
Line Fader
The Line Faders on each channel are used to control volume. Use these
in conjunction with the Gain and EQ on each channel to control the
Volume and Tone of each channel.
13.
Crossfader
The Crossfader is used to fade between channels one and two. The
crossfader is user replaceble from the top panel.
14.
Master/Cue VU meter switch
The Master/Cue switch located above the VU meter is used to choose
what is displayed on the VU meter. Switch to the MASTER position to
have the LEDs display the volume of the Master output. Switch to the
Cue position to monitor the volume of channels One and Two in relation
to each other.
15.
Fader Curve Switch
The Fader Curve switch is used to control the speed in which the volume
of each channel will come in on either side of the crossfader. Switch to
the Left side to have the volume come in quick to aid in punch in or
scratching, switch to the right for smooth blending between sides.
16.
Booth Volume
Use this knob to change the volume of the Booth output on the rear of
your unit.
17.
Master Volume
Use this knob to change the volume of the Master output on the rear of
your unit.
18.
Gain and EQ knobs
Use the High, Mid and Low knobs to effect the tone of your music. Use
the Gain knob in conjunction with your Channel fader to change the vol-
ume of your music..
19.
VU meter
The VU meter displays the current volume of either the Master output
or Cue output, depending on the position of the Master/Cue switch.
20.
MSD/Line-Phono switch
This switch toggles between the MSD (Ipod/USB) and Line/Phono inputs
on your mixer.
9
1
2
3
4
5
6
7
8
9
12
13
14
15
16
17
10
19
20
18
Dmix 300 Manual
11
