background image

T

ELEPHONE 

S

ERVICE 

P

ROBLEMS

If you have any problems with your telephone equipment service

, determine if the problem is with your unit or the telephone

company lines, BEFORE CALLING THE TELEPHONE COMPANY.  Be aware  that  they may charge you for a service call if the problem
is caused by your telephone equipment.

PHONE DOES NOT RING

OFF/LOW/HI

 ringer switch is set to 

OFF

 position

Line cord is disconnected at telephone outlet or at telephone end.

Phone is 

OFF HOOK

. Make certain the hookswitch is depressed when the handset is in the cradle.

SPEAKERPHONE

 indicator is on. Turn off speakerphone.

NO DIAL TONE

Wire is disconnected at telephone jack or at wall jack. Test the telephone in a different wall jack. If it works, the first jack may be
defective.

REDIAL BUTTON DOES NOT FUNCTION

The telephone may have been momentarily disconnected from the telephone jack.

STATIC

Check to see if the coiled handset cord is loose. Try a different phone in the wall jack. If you still get static, the problem is in the line.
Call the telephone company.

BLANK SCREEN

Check if the adapter is connected properly.

26

Содержание Select 3719


































Отзывы: