Cortelco COLLEAGUE 2220 Скачать руководство пользователя

Страница: 32 / 32

IMITED

ARRANTY

If this product was purchased by you new in the U.S. or Puerto Rico,

CORTELCO

warrants it against defects in material and workmanship for a

period of five (5) years from the date of original purchase. This warranty is in

lieu of all other express warranties. During the warranty period,

CORTELCO

agrees to repair or, at its option, replace the defective product, or any part of

it without charge for parts or labor. This is your exclusive remedy. This

warranty does not cover damage resulting from accident, misuse, abuse,

improper installation or operation, lack of reasonable care, the affixing of any

attachment not provided by

CORTELCO

with the product and loss of parts.

The warranty is voided in the event any unauthorized person alters or repairs

the unit.

Telephone companies use different types of equipment and offer various

types of services to customers.

CORTELCO does not warrant that this

product is compatible with the type of equipment of any particular
phone company or the services provided by it

CORTELCO

DISCLAIMS ANY IMPLIED WARRANTY, INCLUDING THE WAR-

RANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A

PARTICULAR PURPOSE, AS OF THE DATE ONE YEAR FROM THE ORIGINAL

PURCHASE OF THE PRODUCT.

CORTELCO

ASSUMES NO RESPONSIBILITY

FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY HAVE

OTHER RIGHTS WHICH VARY FROM STATE TO STATE. SOME STATES DO NOT

ALLOW THE EXCLUSION OR LIMITATION OF SPECIAL, INCIDENTAL OR CON-

SEQUENTIAL DAMAGES OR LIMITATIONS ON HOW LONG AN IMPLIED WAR-

RANTY LASTS, SO THE ABOVE EXCLUSION AND LIMITATION MAY NOT AP-

PLY TO YOU.

If failure occurs and your Call Waiting ID is in warranty, service shall be

provided by returning it to

CORTELCO - Repair Center, 1703 Sawyer

Road, Corinth, Mississippi 38834, shipping prepaid

. The product will

be repaired or replaced if examination by us determines the product to be

defective. Call Waiting IDs received damaged as a result of shipping will re-

quire you to file a claim with the carrier.

COLLEAGUE

2220

Manual Rev. 4

Содержание COLLEAGUE 2220

































Результаты поиска

Содержание COLLEAGUE 2220

Отзывы:

Похожие инструкции для COLLEAGUE 2220

Бренды по названию

Популярные бренды

Cortelco COLLEAGUE 2220, Инструкция пользователя

Результаты поиска

Содержание COLLEAGUE 2220

Отзывы:

Похожие инструкции для COLLEAGUE 2220

Бренды по названию

Популярные бренды