Cortelco C58 Скачать руководство пользователя

Страница: 44 / 81

Subscribe For MWI

If enabled, the phone will send Message Waiting Indication

(MWI) Subscribe message to the SIP Server

MWI Number

Specify the number to call to retrieve Voice Messages.

Subscribe Period

Time interval between MWI Subscribe Messages.

Conference Type

Choose Conference Type, either local or network

Conference Number

Number to dial to access network conference server. Not needed

if Local conference mode is chosen

Registration Expires

SIP re-registration time. Default is 3600 seconds. If the server

requests a different time, the phone will change to that value.

Enable Service Code

Enables or disables the services described below. These codes

will be sent to the SIP server to activate or deactivate the service.

DND On Code

Do Not Disturb (DND) – When this hot key is pressed, all calls to

the extension to be rejected by the server. The incoming call

record will not be displayed in the Call History.

DND Off Code

Disable Server DND as described above.

Always CFwd On Code

Always Call Forward On – When this function is enabled, the

server will forward all calls to a designated number. The

incoming call record will not be displayed in the Call History.

Always CFwd Off Code

Disable Server Always CFwd as described above.

Busy CFwd On Code

Busy Call Forward On - When this function is enabled, the server

will forward all calls to a designated number if the telephone is

busy. The call record will not be displayed in Call History.

Busy CFwd Off Code

Disable Server Busy CFwd as described above.

No Ans. CFwd On Code

No Answer Call Forward On - When this function is enabled, the

server will forward all calls to a designated number if there is no

answer within a designated time. The incoming call record will not

be displayed in the Call History.

No Ans. CFwd Off Code

Disable Server No Ans. CFwd as described above.

Anonymous On Code

Anonymous On – When this function is enabled, the server will

allow the phone to make anonymous calls. In other words
“Anonymous” will be transmitted for Caller ID.

Anonymous Off Code

Disable Anonymous Calling function described above.

Keep Alive Type

Specifies the NAT keep alive type. If OPTION is selected, the

phone will send OPTION sip messages to the server every NAT

Keep Alive Period. The server will then respond with 200 OK.

If UDP is selected, the phone will send a UDP message to the

server every NAT Keep Alive Period.

Keep Alive Interval

Set the NAT Keep Alive Interval. Default is 60 seconds

User Agent

Set SIP User Agent value.

DTMF Type

DTMF sending mode. There are four modes:



In-band (Relay)



RFC2833



SIP_INFO



AUTO

Содержание C58


















































































Результаты поиска

Содержание C58

Отзывы:

Похожие инструкции для C58

Бренды по названию

Популярные бренды

Cortelco C58, Руководство пользователя

Результаты поиска

Содержание C58

Отзывы:

Похожие инструкции для C58

Бренды по названию

Популярные бренды