Cortelco C56 Скачать руководство пользователя страница 45

Страница: 45 / 53

- 45 -

Config Setting

Field Name

Explanation

Save Configuration

Save the current phone configuration. Clicking this saves all

configuration changes and makes them effective immediately.

Backup Configuration

Save the phone configuration to a txt or xml file. Please note to
Right click on the choice and then choose “Save Link As.”

Clear Configuration

Logged in as Admin, this will restore factory default and remove all

configuration information.

Logged in as Guest, this will reset all configuration information

except for VoIP accounts (SIP1-2) and version number.

5.3.6.4

Update

This page allows uploading configuration files to the phone.

Update

Field Name

Explanation

Web Update

Web Update

Browse to the config file, and press Update to load it to the phone. Various

types of files can be loaded here including firmware, ring tones, local

phonebook and config files in either text or xml format.

TFTP/FTP Update

Server Address

FTP/TFTP server address for download/upload. The address can be IP

address or Domain name with subdirectory.

User

FTP server Username for download/upload.

Password

FTP server password for download/upload.

File name

Name of update file or config file. The default name is the MAC of the

phone.

Note:

The exported config file can be modified. The config file is made up of modules. Modules

which do not need changes may be deleted. For example, a config file can be downloaded and all

modules removed except the SIP module. After rebooting, only the SIP settings will be changed.

Содержание C56






















































Результаты поиска

Содержание C56

Отзывы:

Похожие инструкции для C56

Бренды по названию

Популярные бренды

Cortelco C56, Руководство пользователя

Результаты поиска

Содержание C56

Отзывы:

Похожие инструкции для C56

Бренды по названию

Популярные бренды