- 31 -
Field Name
Explanation
Phone number
There are two types of matching: Full Matching or Prefix Matching.
In Full matching, the entire phone number is entered and then
mapped per the Dial Peer rules.
In prefix matching, only part of the number is entered followed by
T. The mapping with then take place whenever these digits are
dialed. Prefix mode supports a maximum of 30 digits.
Destination
Set Destination address. This is optional. For a peer to peer call,
enter the destination IP address or domain name. To use a dial rule
on the SIP2 line, enter 0.0.0.2. For SIP3 enter 0.0.0.3
Port
Set the Signaling port, the default is 5060.
Alias
Set the Alias. This is the text to be added, replaced, or deleted. It is
optional.
Note:
There are four types of aliases.
1) Add: xxx – xxx will be dialed before any phone number.
2) All: xxx – xxx will replace the phone number.
3) Del: The characters will be deleted from the phone number.
4) Rep: xxx – xxx will be substituted for the specified characters.
Call Mode
Select either SIP or IAX2 protocol.
Suffix
Characters to be added at the end of the phone number. This is
optional.
