1. HANDSET ANTENNA
2. NEW CALL/MSG(MESSAGE )WAITING LED Indicator:
Blinks when recording a new
incoming call or when receiving a Message Waiting signal, if you have subscribed to a
Voice Mail Message service from your local telephone company. (See page 11 ).
3. Large LCD Screen:
Shows call information, phone status, prompts and directory items.
HANDSET Controls
4. TALK Button:
Press to answer an incoming call or to place a call. Press to end
a call.
5. TEMPORARY TONE Button:
Press to temporarily change the dialing mode
from PULSE to TONE for rotary service users . (Press once before entering numbers to
access the Answering System or Electronic Banking services, etc.)
6. button:
Press to access names and numbers stored in the DIRECTORY.
7. FUNC(FUNCTION)/VOICE MAIL /VOICE MAIL Button:
(FUNCTION)- Press
and hold down to access special functions operation in STANDBY mode. (For special
functions see page 19). (VOICE MAIL) - Press to automatically dial the Voice Mail Post
Code in your area to access your Voice Mail Message. (Format) -Press to change the
format of the displayed number when reviewing the Caller ID list or phone book.
8. /FLASH Button:
(FLASH) Press to answer a call if you have Call Waiting.
(EDIT) Press to edit listed items.
9. BATT LOW INDICATOR :
Appears on the LCD Screen when the battery charge is low.
(See page 26 for detail)
10. Button:
Press to move around on the Large LCD Screen.
11. HANDSET Volume Control(Hi, Mid, Low) Switch:
Select the receiver volume level
(HI, MID, LOW).
12. HEADSET JACK:
Insert Headset plug into the Headset Jack to enjoy hands-free
communication.(See page 10 for details.)
13. TELEPHONE KEYPAD:
Allows you to make a call depending on pressed button.
(for TELEPHONE KEYPAD characters, see page 24.)
14.
RE/PA
Button:
(SAVE )Press and hold down to save the changes on the listed
items. (REDIAL) Press to redial the last number you dialed. (PAUSE) Press to insert a
pause while dialing. (You will need the
RE/PA
button to dial numbers which use
an alternative Long Distance Access Code.)
15. /SCAN
button:
(SCAN) Press to change the operating channel when you hear
interference. (DELETE) press and hold down to delete items or individual characters.
16. CHARGE CONTACTS:
For charging the BATTERY PACK inside the
HANDSET.
We
recommend cleaning the CHARGE CONTACTS periodically with a damp cloth.
D
Technical Information
This cordless telephone uses radio frequencies to allow mobility. There are certain
difficulties in using radio frequencies with a cordless telephone. While these are normal,
the following could alter operation of your system.
Noise
Electrical pulse noise is present in most homes at one time or another. This noise in
most intense during electrical storms. Certain kinds of electrical equipment such as light
dimmers, fluorescent bulbs, motors, and fans also generate noise pulses. Because radio
frequencies are susceptible to these noise pulses, you may occasionally hear them in
your HANDSET. Generally they are a minor annoyance and should not be interpreted as
a defect in your system.
Range
Because radio frequency is used, location of the BASE UNIT can affect operating range.
Try several locations in your home or office and pick the one that gives you the clearest
signal to the HANDSET.
Interference
Electronic circuits activate a relay to connect the cordless telephone to your telephone line.
These electronic circuits operate in the radio frequency spectrum. While several protection
circuits are used to prevent unwanted signals, there may be periods when these
unwanted signals enter the BASE UNIT. You may hear clicks or hear the relay activate
while your are not using the HANDSET. If interference occurs frequently, it can be mini-
mized or eliminated by lowering the height of your BASE UNIT ANTENNA or by relocating
the BASE UNIT. You can check for interference before selecting the final BASE UNIT loca-
tion by plugging in the phone.
NOTICE:
This cordless telephone uses radio communication between the HANDSET and the
BASE UNIT and may not ensure privacy of communication. Other devices, including other
cordless telephones, may interference with the operation of this cordless telephone or
cause noise during operation. Units not containing coded access may be accessed by
other radio communication systems. Cordless telephones must not cause interference to
any licensed radio service.
Technical Information
29
IMPORTANT
When you hear interference, press the /DEL
button to charge the operating channel.
DEL
DIR
DIR
SAVE
SAVE
SAVE
SAVE
DEL
