Cortelco 2750 Скачать руководство пользователя страница 46 | Manualshive

Страница: 46 / 61

Cortelco 2750 Скачать руководство пользователя страница 46

6.21.2.

All Page

The

All Page

feature enables you to make announcements through all of the other 2750/2740 stations.

When you make an All Page, your announcement, preceded by a double paging alert tone, will be heard
at all the phones that are not in use and do not have their

DO NOT DISTURB

or

BLOCK PAGE

activated. To perform an All Page:
a.

Press

PAGE

twice.

b.

After you hear the paging tone, speak towards the telephone or lift the handset and make your
announcement.

6.21.3.

Answering Pages

6.21.3.1.

Single Page

A page directed to a particular station may be answered only at that station. Lift the handset, press

SPEAKER,

HEADSET

, or the flashing

INTCM

button. You will then be connected to the caller in a

private intercom conversation. Replace the handset in the cradle or press the

SPEAKER

or

HEADSET

button to hang up.

6.21.3.2.

All Page

An All Page may be answered from any phone in the system, even one that is busy on an outside line,
has

DO NOT DISTURB

set or has blocked pages. You may answer an All Page by pressing the

flashing

INTCM

button. You will then be connected to the caller in a private intercom conversation.

6.21.4.

Blocking Pages

Pages may be blocked at any telephone in the system.. When pages are blocked, no pages will be heard
on that telephone. Also, the person attempting to page the telephone will hear a no action tone.
To block pages at your telephone:
a.

Press

MENU

. The display will read

Phone Setting

b.

Press the soft key under

ENTER.

c.

Press the

Down Arrow

repeatedly until

Intercom Prefs

appears in the display.

d.

Press the soft key under

ENTER.

e.

Press

DOWN ARROW

repeatedly until

Pages: Allowed

appears in the display.

f

Press the soft key under

CHANGE

to select between Pages

ALLOWED

and Pages

BLOCKED

.

g.

Press

MENU

to exit.

6.22.

Room Monitoring

The Room Monitoring feature allows you to activate the speakerphone of another station to monitor
sounds in that room. This feature is especially useful in a nursery or home office where there are
children present.
Place an intercom call to telephone you wish to monitor. Press

MUTE

if you want to prevent sounds in

your room from being heard at the monitored phone.
To end monitoring, hang up the handset or press

SPEAKER

. The remote station will disconnect

immediately.

Note:

The remote phone must be set to Intercom HANDSFREE.

40

2750 User Guide Version 1.3

«
...
44
45
46
47
48
...
»

Содержание 2750






























































Отзывы:

Нет отзывов